FAB NO. WR‑LPV3 / STATUS: CUSTOM BUILD

THE CATALOG SOLD OUT.
THE SHOP DIDN’T.

Every piece that used to live on this page is gone from stock. Nothing replaced it — because nothing needs to. It was never made on an assembly line. It was made by crafts-people, one order at a time, and that’s still exactly how it gets made.

Start a custom build

WaxRax doesn’t run a factory. everything is made by hand.

Every CP-12, every LP-V4, every console that we ship comes out of our metal-working shop in Brooklyn — cut, welded, anodized, and finished by hand.

There was never a warehouse behind it. There was a backlog.

As collectors asked for a different finish, a taller tower, hardware to match a specific room, the one-at-a-time approach stopped being a constraint and became the point. The catalog you used to browse is now closer to a portfolio: proof of what the shop can build, not a just a shelf of what’s left.

If a piece on this page caught your eye, it’s still buildable. It just starts with a conversation instead of a cart…

Shop Record

Operating since: 2003
In‑house machining: Manual + 3/4‑axis CNC
Location: Brooklyn, NY
Design process: CAD + 3D print
Parent shop: Brooklyn Custom
Catalog stock: 0 units

Six pieces. Same shop. Built when you order.

These are the models that defined the WaxRax line. Specs below are the originals — your build can match them exactly or change every dimension, material, and finish to fit your space.

CP-7 Pedestal

Ø16.0 × 32.0 IN — holds 45–50 singles
Powder-coated aluminum & steel rings, brass or stainless supports

Learn More

CP-12 Pedestal

Ø20.0 × 29.0 IN — holds 40–50 LPs
Powder-coated aluminum & steel rings, brass or stainless supports

Learn More

RC-2 Record Cart

30.0 × 18.0 × 34.0 IN — holds 400 LPs
Welded powder-coated steel uni-frame, anodized aluminum shelves, 5″ casters

Learn More

LP-V3 Shelving Tower

29.0 × 18.0 × 60.0 IN — holds 550 LPs
Heavy gauge anodized aluminum, two-tone & custom color options

Learn More

LP-V4 Shelving Tower

29.0 × 18.0 × 72.0 IN — holds 700 LPs
Heavy gauge anodized aluminum, single or dual-color finish

Learn More

LPH Record & Stereo Console

59.0 × 19.0 × 39.0 IN — holds 550 LPs
Powder-coated steel & anodized aluminum, brass or stainless legs

Learn More

Everything happens under one roof in New York — the same shop that’s been doing this since 2003.

WaxRax is the vinyl-furniture side of Brooklyn Custom Metal Fabrication. The equipment, the materials, and the finishing options below aren’t a vendor list — they’re what’s on the shop floor.

01

Process

– CAD modeling for every part
– 3D-printed prototypes
– Manual milling & turning
– 3- and 4-axis CNC milling

02

Material

– Aluminum
– Brass
– Bronze
– Carbon steel
– Stainless steel

03

Finish

– Powder-coating
– Electro-plating
– Bead blasting
– Hand-rubbed antique patina

Consult

Tell us your collection size, the room, the finish you’re picturing. We’ll work directly with you, your architect, or your designer.

Model

Every piece starts as a CAD model, checked and adjusted before any material is touched.

Prototype.

Complex parts get a 3D-printed test fit, so the first real part comes out right.

Fabricate & finish

Milling, turning, CNC, then anodizing, powder-coating, plating, or hand patina — same shop, start to finish.

Crate & Ship

Fully assembled, crated, and freighted to your door — domestic or international.

unleash the power

Have a piece in mind?

Send a few lines about your collection, your space, and the finish you’re after. We’ll follow up directly — no order forms, no waitlist.

Contact US